Boat and RV Storage Construction Cost
Start With the Building Format, Then Price the Site and Scope.
- $65 to $95 per gross sq ft
- Enclosed boat and RV buildings only
- 2026 published cost basis
- BLS-indexed construction pricing
The current Johnson Construction planning model uses a 2026 building hard-cost range of $65 to $95 per gross square foot for enclosed boat and RV storage. The range is adjusted over time with the U.S. Bureau of Labor Statistics producer price index for new warehouse construction. It is an early planning range, not a bid, proposal, or contract.
Enclosed buildings, covered canopies, and open parking are different scopes and should not be treated as one price. The published range on this page applies only to enclosed boat and RV storage. Canopies and open parking require separate project pricing because this model does not contain a verified cost range for them.
What the Enclosed Building Range Covers
The hard-cost range is applied to gross building area. It represents the enclosed storage building rather than the total development budget. The Johnson field scope can include structural steel, metal roofing and wall systems, oversized roll-up doors, siding, trim, gutters, and flashing.
The estimate excludes land, site-specific development, utility extensions, design, permits, financing, and storage equipment. Those costs require information about the property, jurisdiction, civil plan, and complete project scope.
Bay Size, Clear Height, and Door Openings
Boat and RV storage is planned around the vehicles the facility will serve. Bay depth, clear height, door width, structural spacing, and turning room affect the building configuration and material quantities. A project with larger enclosed bays cannot be priced from the same unit count as standard self-storage.
Gross building area is the correct basis for the planning calculation because walls, structure, and circulation are part of the building even when they are not rentable space.
Site Conditions Remain a Separate Cost
Large vehicles require practical access through the property. Site grading, drainage, utilities, paving, fire access, and turning geometry are specific to the parcel and approved civil plan. They are not included in the enclosed-building hard-cost range.
A site-specific number requires the project location, building plan, bay schedule, structural requirements, and current material pricing.
From Planning Range to Project Pricing
Once the site and building layout are defined, Johnson Construction can review the plans and price the work shown in the project scope. The installation timeline calculator can model the field schedule for the enclosed building.
| Facility Component | Planning Treatment |
|---|---|
| Enclosed boat and RV building | $65 to $95 / gross sq ft |
| Covered canopies | Price from plans |
| Open vehicle parking | Price from civil scope |
| Land and site development | Excluded |
Common Questions
How much does it cost to build enclosed boat and RV storage?
The current planning model uses $65 to $95 per gross square foot for the enclosed building. The project total changes with the site, bay layout, clear heights, door sizes, utilities, and civil scope.
Does the range include land and site development?
No. Land, grading, drainage, paving, utility extensions, design, permits, financing, and storage equipment are excluded from the building hard-cost range.
Does the same range apply to RV canopies?
No. The verified model covers enclosed boat and RV buildings. Covered canopies and open parking require separate pricing from the structural and civil plans.
What information is needed for project pricing?
Project pricing requires the location, building plan, bay schedule, clear heights, door sizes, structural requirements, and the construction scope shown in the plans.